The average cost of a package for custom tuning and an SCT X3 handheld flash device is between $650-850 dollars. This inculdes the handhed flash programmer, custom dyno tuning including dyno time, and color RWHP, RWTQ, and Air/Fuel Ratio printouts. We datalog many different parameters from Spark, and Fuel Related PID's, to Intake Air Temps and Engine Coolant Temps. We make sure that all part throttle and low-RPM parameters are just as dialed in as wide open throttle air fuel ratios.
We pride ourselves in quality calibrations, and insist that all mechanical problems be resolved prior to the vehicle being tested and/or calibrated on the dyno. Please call for a checklist.
Some larger jobs may require extra tuning. Usually naturally aspirated tuning runs about $250 if you have your own SCT flash device and forced induction tuning runs around $450. These are not hourly rates, these are per application. Again, each job is different, so please make sure that you include everything done to the vehicle when requesting a tuning quote. Make sure all of the more important parameters (injectors, MAF, intake, boost levels, intake air temp sensor location, spark plug gap, etc.) are included.
Mail order tunes are $75 dollars per tune. A (3) Pack of Custom Tunes to fill your SCT handheld flash device is $139.99 dollars.


