How Do I Load Your Emailed Tune Onto My Tuner?

[TillmanSpeed]

FOR ALL USB DEVICES, PRINTERS, SCANNERS, SCT TUNERS, ETC. YOU NEED TO INSTALL THE SOFTWARE BEFORE PLUGGING IN THE DEVICE. OTHERWISE YOU HAVE TO INSTALL DRIVERS MANUALLY FROM THE DEVICE MANAGER. SEE FAQ ENTRY FOR INSTALLING DRIVERS MANUALLY
--------------------------------------------------------------------------------

FOR THE FORD X3/SF3 3000/3015 AND THE GM SF3 3100:

*Installing the Software, if already installed skip to the next step*

Make sure the device is not plugged in.
Go to your Email, and save the tune files that were sent to you. For the location, select the desktop.
Go to SCT's Tech Support page, click on Device Updates and Downloads. For drop down 1, pick the X3 Ford - P/N 3000, (this software will work for all products listed in this section) For Drop down 2, select Device Update software, hit Search. Click on "Click Here to Download" then run and install the X3/Livewire updater software.

*Plugging in the Device and Installing Drivers*

Once the software is installed, plug in your X3.
A Found New Hardware Wizard will pop up, It may ask you "Can Windows connect to Windows Update to Search for Software?" If it does, click "No, Not at this Time" then press Next.
At the Next Window, Select "Install Software Automatically (Recommended)" and click Next. Windows will search and Install the drivers for your device, Click Finish to Finish the Driver Installation
If a Found New Hardware Wizard did not pop up, and you get an error in the next step, go back to the FAQs and locate the Entry for Installing Drivers Manually

*Loading the Custom tunes onto the X3*
Now that the drivers are installed, open the X3/Livewire Updater software. There will be a new Icon on your desktop. (Yellow, Orange and White.)
Once opened, click on the button labeled: "Live Load Tunes" this will open the window for loading custom tunes onto your device.
Click on the browse button, then browse to the location that you saved the tune files to. (Should be the desktop)
Click on the first file, and press open
This will bring you back to the Tune Loader Window, Select the file position, and type a Name for the tune file
Once the file position is selected and the Tune Name is populated, press the Program button at the button, this will add the tune file to your tuner.
For More than one tune file, repeat this process

-------------------------------------------------------------------------------------------------------------

FOR THE FORD X2 9400:

*Installing the Software, if already installed skip to the next step*

Make sure the device is not plugged in.
Go to your Email, and save the tune files that were sent to you. For the location, select the desktop.
Go to SCT's Tech Support page, click on Device Updates and Downloads. For drop down 1, pick the X2 Ford - P/N 9400, For Drop down 2, select Device Update software, hit Search. Click on "Click Here to Download" next to the top Program Listed: Liveload 3. Then run and install the Liveload Program.

*Loading the Custom tunes onto the X2*

Now that the Liveload 3 software is Installed, let's open it up. To find it, Press Start / Then All Programs / Then look for the SCT Category / You should see Liveload in the list.
Once Opened, Click on the "BROWSE" button, then browse to the location that you saved the tune files to. (Should be the desktop)
Click on the first file, and press open
This will bring you back to the Liveload Window, Select the file position, and type a Name for the tune file
Once the file position is selected and the Tune Name is populated, press the Add File button at the button, this will add the tune file to your tuner.
For More than one tune file, repeat this process